Fat Tire Clone (AG)
Specifics
General Information
Method: All Grain

5/18/08 - Made a 2 Liter - 1 lb. DME yeast starter.  The yeast had been in the fridge for a few months and was a bit sluggish to get going.  Started early because the yeast was several months old, it fully fermented by Saturday.

5/24/08 - Brewed main wort, something went wrong during the sparge, my efficiency was around 60%.  I'm thinking it was a combination of a poor crush and sparged the grain too fast. I also stirred the mash right before recirculation so that may have played a part.

Chilled with the tap water to 100 degrees, then switched to the pump and ice water (I got 40 lbs. of ice this time and had plenty).

Was able to chill to pitching temps fairly quickly, in the future I'll measure the time it takes to be ready.

Pitched yeast good signs of fermentation within 2 hours, really chugging along by the morning.

I replaced the aroma hops with 2 oz of Hallertauer Hersbrucker rather than 1 oz of fuggles.  

6/30/08 - Been drinking this for a while, Hersbrucker hops definately made for a different finish, less like Fat Tire and more like a Heffeweizen.   I would leave the Hersbrucker hops out next time.

Recipe
Scale
Scale This Recipe
Enter desired final yield (volume):  gallons
Reference
Grains
5.00 pounds 46.2% of grist
4.50 pounds 41.6% of grist
0.50 pounds 4.6% of grist
0.50 pounds 4.6% of grist
0.33 pounds 3% of grist
10.83 pounds Total Grain Weight 100% of grist
Miscellaneous Ingredients (Non-Fermentable)
1 tsp Irish Moss @ 15 minutes (Boil)  
Reference
Hops
1.00 ounces 4.5% Pellets @ 60 minutes
Type: Bittering
Use: Boil
4.5 AAUs
1.00 ounces 4.5% Pellets @ 20 minutes
Type: Bittering and Aroma
Use: Boil
4.5 AAUs
2.00 ounces 5% Pellets @ 0 minutes
Type: Aroma
Use: Aroma
10 AAUs
4.00 ounces Total Hop Weight 19 AAUs
Mash
Mash Type: Infusion
Step Description Temp. Time
Infusion 154° F 60 min.
Print Log Print Recipe Output to Beer XML
More BrewBlogs
2Fat Tire Clone Aug 01, 2007
<< <  More  12 13 14 15 [16] > >>